I remember a Tuesday back in ’84, working on a heavy-duty structural frame in a shop that smelled of burnt ozone and old grease. I was trying to hold a thick plate steady, but the cheap, mass-produced metal-working clamps I’d Continue reading Different Types of Clamps for Metalwork
I can still hear the ringing in my ears from a Tuesday afternoon back in ’84, when a rookie in the fabrication shop decided he could force a dull, cheap tool through a thick piece of high-carbon steel. He was Continue reading Using a Cold Chisel on Metal
I remember standing in a loud, cramped fabrication shop back in ’84, watching a young kid try to force a job through with a cheap, handheld unit that wasn’t up to the task. He was peppering the sheet metal with Continue reading Using Spot Welding for Thin Metal
I remember sitting in a cramped fabrication shop back in ’84, watching a young apprentice try to force a thick strip of steel into a curve using nothing but brute strength and a prayer. The metal didn’t just resist; it Continue reading Common Methods for Bending Metal
I remember sitting at my bench back in ’84, staring at a piece of sterling silver that I’d just ruined because I thought I could manhandle the tool into submission. I was young, impatient, and convinced that if I just Continue reading Metalwork With a Jeweler’s Saw
People will tell you that if a tool is pitted with rust or has a seized joint, it’s nothing more than scrap metal waiting for the bin. They’re wrong. I spent forty years in heavy fabrication, and I’ve learned that Continue reading Restoring Old Metal Tools to Working Order
I can still smell the ozone and burnt coal from my first week in the shop, a scent that sticks to your skin long after you’ve clocked out. I remember standing over a piece of glowing mild steel, my hands Continue reading Pursuing Metalwork Training
I remember a job back in ’88, standing over a piece of heavy-gauge steel that I’d spent three hours trying to force into shape with a cheap, flimsy set of pliers I’d picked up at a big-box hardware store. The Continue reading Tools for Bending Sheet Metal
I remember sitting at my old workbench back in the late eighties, the air thick with the smell of cutting oil and the steady, rhythmic scritch-scritch of a hand graver biting into a brass plate. I was trying to mark Continue reading Techniques for Engraving Metal Surfaces
I can still smell it if I close my eyes—that sharp, biting scent of cutting oil mixed with the fine, metallic dust that settles in your lungs after a long afternoon in the shop. I remember my first real encounter Continue reading Basics of Using a Metal Lathe